A cold bedroom or home office does not always justify heating the entire house. Wall mounted electric heaters keep floor space clear while adding warmth where you spend time. But a quiet panel heater, a plug-in fan heater, and a recessed unit can feel quite different in daily use. This guide compares ten models for different rooms and installation plans. Before ordering, check the exact model’s electrical requirements and mounting clearances, especially if the heater will go in a bathroom.

Our Top Picks

Product	Best for	Key feature	Rating
Dreo WH719S	Smart heating	App control and vertical oscillation	★★★★★
Heat Storm HS-1500-PHX-WIFI	Infrared heating	Wi-Fi control	★★★★☆
Envi LE5012P	Quiet rooms	Fanless 500W convection	★★★★★
Dreo WH517AS	Suitable bathroom installations	ALCI-protected plug	★★★★☆
Stiebel Eltron CK 15E	Compact spaces	Hardwired fan heat	★★★★☆
Cadet Com-Pak CSC151TW	Recessed installation	Complete in-wall unit	★★★★★
De’Longhi HMP1500	Flexible placement	Wall or floor use	★★★★☆
EconoHome 400W Panel Heater	Small rooms	Gentle, low-wattage heat	★★★★☆
Broan 174	Bathroom remodels	Recessed or surface mounting	★★★★☆
King Electric PAW1215	Custom installation	Selectable wattages	★★★★☆

Top 10 Wall Mounted Electric Heaters

1. Dreo WH719S Smart Wall Heater

The WH719S is the easiest recommendation for someone who wants responsive warmth and convenient controls. Its vertical oscillation helps direct heated air into the room, while app and remote controls let you make adjustments from your desk or sofa. Dreo also highlights its precise temperature control.

There is a fan, so it will not be silent. Still, it offers a useful balance of heating performance and everyday convenience for a frequently used room.

Key features: Smart controls, thermostat, and vertical oscillation
Best for: Bedrooms and home offices needing responsive supplemental heat
Pros: Convenient adjustments; directed airflow; no floor-space sacrifice
Cons: Audible fan; requires a suitable wall location
Why we recommend it: It combines the controls most shoppers want with active heat distribution.

2. Heat Storm HS-1500-PHX-WIFI Infrared Heater

If you prefer an infrared wall heater, Heat Storm’s Wi-Fi Phoenix is a strong candidate. You can adjust it remotely, and mounting it frees the floor area that a conventional space heater would occupy. Heat Storm continues to provide a manual for this model.

Its housing is more prominent than a flat panel, so measure the wall before ordering. Pay close attention to the model suffix, too; Phoenix versions have different features.

Key features: Infrared heating, wall mounting, and Wi-Fi control
Best for: A regularly used room where remote control is useful
Pros: Connected controls; floor-saving installation
Cons: Bulkier than a slim panel; similar model names can cause confusion
Why we recommend it: It offers a distinct heating option with practical remote controls.

3. Envi LE5012P Panel Heater

The Envi LE5012P suits someone who would rather have quiet, steady warmth than a burst of hot air. This 500-watt plug-in panel uses fanless convection and has a narrow profile that looks discreet on a bedroom or office wall.

Expect gentle supplemental heat, not a quick fix for a large, drafty room. Its lower output is precisely why it works better for smaller spaces and people who dislike fan noise.

Key features: 500W output, plug-in installation, and fanless operation
Best for: Smaller rooms where quiet matters most
Pros: Silent; slim; avoids hardwired installation
Cons: Slower heating; limited output for cold, poorly insulated rooms
Why we recommend it: It fills a useful niche that high-output fan heaters do not.

4. Dreo WH517AS Bathroom Wall Heater

Bathrooms require more care when choosing and positioning an electric heater. Dreo markets the WH517AS as a bathroom wall heater and equips it with an ALCI-protected plug. That makes it more relevant to consider here than a general-purpose bedroom model.

The protective plug does not mean you can mount it anywhere. Follow the manufacturer’s bathroom placement and clearance instructions and applicable electrical requirements.

Key features: Wall mounting, smart controls, and ALCI-protected plug
Best for: Bathrooms where the specified installation conditions can be met
Pros: Bathroom-oriented design; convenient controls
Cons: Placement needs careful checking; fan noise
Why we recommend it: Its intended application makes it a sensible bathroom-focused option to evaluate.

5. Stiebel Eltron CK 15E

The CK 15E is for a homeowner who wants a permanent heater rather than another appliance plugged into the wall. Stiebel Eltron specifies this 120-volt model at 1,500 watts and includes a built-in thermostat. Its compact shape is helpful when wall space is limited.

Allow for electrical installation in the budget. Once installed, its simple controls make more sense for someone who values a fixed heating solution over app features.

Key features: 1,500W output, built-in thermostat, and hardwired design
Best for: Permanent heat in a compact room
Pros: Small footprint; straightforward operation; established manufacturer
Cons: Installation adds work and cost; fan operation
Why we recommend it: It is a focused choice for a planned electrical upgrade.

6. Cadet Com-Pak CSC151TW

If you are remodeling, a recessed heater can look much tidier than a surface-mounted box. Cadet identifies the CSC151TW as a complete 120-volt, 1,500-watt unit with a built-in thermostat, wall can, and grille.

Check that the Amazon offer is for the complete unit. Cadet also sells assemblies and components separately, which could leave you missing parts when installation day arrives.

Key features: Recessed wall can, grille, and built-in thermostat
Best for: Remodels and permanent supplemental heat
Pros: Neat finished appearance; complete-unit configuration
Cons: Requires a suitable wall cavity and electrical work
Why we recommend it: It delivers the integrated look many homeowners want from an in-wall heater.

7. De’Longhi HMP1500 Mica Panel Heater

Not ready to settle on a permanent wall position? The HMP1500 can be used on the floor or mounted using its included wall kit. De’Longhi specifies a maximum output of 1,500 watts, adjustable controls, and a slim micathermic panel design.

That flexibility is valuable if you rearrange furniture or move. The panel is fairly broad, however, so check its dimensions and required clearances against the available wall area.

Key features: Wall or floor placement, 1,500W maximum, and adjustable thermostat
Best for: Rooms with layouts that may change
Pros: Flexible placement; slim profile; simple controls
Cons: Needs more wall width than a compact fan heater
Why we recommend it: You can test where it works best before mounting it.

8. EconoHome 400W Panel Heater

EconoHome’s 400-watt wall panel is aimed at smaller spaces that need a little extra warmth. The manufacturer pairs its convective panel with a thermostat and reflector. It is a quieter choice than a fan heater, though its output is far more modest.

A lower wattage means lower electricity use per hour of operation, but it also means less heat. Choose this for an appropriately sized, reasonably insulated room rather than expecting it to rescue a drafty basement.

Key features: 400W panel, thermostat, and reflector
Best for: Small rooms needing gentle supplemental warmth
Pros: No fan; slim shape; lower hourly power draw
Cons: Limited heating capacity; slower results
Why we recommend it: Its modest output is a practical match for a small, comfortable space.

9. Broan 174 Wall Heater

Broan’s 174 makes sense when bathroom heating is part of a larger renovation. Broan specifies 750/1,500 watts on a 120-volt configuration and offers recessed mounting or surface mounting with a separately sold kit. Check the controls and accessories included with the exact offer.

Its installation is more involved than a plug-in heater. If an electrician is already working on the room, though, you can plan the location and circuit at the same time.

Key features: Multiple electrical configurations and mounting options
Best for: Bathroom renovation projects
Pros: Recessed finish available; flexible installation approach
Cons: Electrical work required; surface-mount kit costs extra
Why we recommend it: It fits naturally into a remodel with a planned heater location.

10. King Electric PAW1215

King Electric’s PAW series gives an installer room to tailor the heater to the space. The 120-volt PAW1215-BW has selectable wattages up to 1,500 watts, according to King’s specifications. That flexibility is useful when the room and electrical plan call for a particular output.

This is a purchase to make with the installation details in hand. Confirm the exact model, controls, wall can, and circuit requirements before checkout.

Key features: Selectable wattages and in-wall forced-air design
Best for: Permanent installations planned with an electrician
Pros: Flexible output; tidy recessed appearance
Cons: More specification and installation work
Why we recommend it: It allows the heater’s output to be matched to a real room plan.

How to Choose a Wall Mounted Electric Heater

Decide how you want to install it. A plug-in model is generally simpler to add to a finished room. A recessed, hardwired heater can look cleaner, but it requires a suitable wall cavity and an appropriate electrical circuit. Always follow the model’s mounting height and clearance instructions.

Match the output to the room. A 400–500W panel offers gentle supplemental heat for a smaller space. A 1,500W heater can deliver heat faster, but drafts and insulation have a major effect on comfort. Higher wattage also means greater electricity use while the heater runs at full output.

Consider sound and appearance. Fanless panels are appealing where you sleep or work quietly. Forced-air heaters circulate warmth more quickly but produce fan noise. If your heating project involves a fireplace area, these childproof fireplace safety ideas offer useful placement and household-safety considerations.

Final Thoughts

The best wall mounted electric heaters are the ones that suit both the room and the installation. Start with the Dreo WH719S if you want versatile smart controls, choose the Envi LE5012P for quiet background warmth, or consider the Cadet Com-Pak when a recessed heater fits your renovation. Measure the wall, check the electrical requirements, and confirm the exact model before buying.

FAQs

Are wall mounted electric heaters expensive to run?

Cost depends on wattage, run time, and your electricity rate. A 1,500W heater operating continuously at full power uses 1.5 kilowatt-hours per hour; thermostat cycling can reduce its actual run time.

Can I install a wall mounted electric heater in a bathroom?

Only use a model approved for the intended location, and follow its mounting and electrical instructions. A protective plug does not make every position near water acceptable.

Is a fanless wall heater good for a bedroom?

Yes, if quiet operation matters more than rapid heating. Match the panel’s output to the room; lower-wattage models may struggle in large or drafty bedrooms.

Can one wall heater warm an entire house?

A single wall heater is generally intended for one room or supplemental heating. Heating an entire home requires a system designed around the building’s size and heat loss.

Should I buy a plug-in or hardwired heater?

A plug-in heater is easier to add when you have a suitable outlet and mounting location. A hardwired model suits a planned permanent installation, especially during a remodel.